Fullness of Natural Lashes (1-3 points)

Evaluated based on the «before» photo.

The model has few natural lashes – 1 point

Medium fullness of lashes – 2 points

Very full lashes – 3 points

Eye Asymmetry (1-3 points)

Evaluated based on the «before» photo.

No asymmetry – 1 point

Slight asymmetry – 2 points

Strong asymmetry – 3 points

Modelling (1-10 points)

When evaluating, attention is paid to how well the effect and lash curl were selected for the model. If asymmetry was present, the degree to which it was corrected is also considered. The more complex the asymmetry in the «before» photo, and the better it.

Work Cleanliness (1-10 points)

Evaluated based on both «before» and «after» photos.

– White residue from remover on the lashes,

– Residues of eye shadow, mascara, or other cosmetics,

– Foundation in between the lashes,

– Particles in the inner and outer corners of the eyes,

– Tear residue in the outer corners of the eyes,

– Excess glue used,

– Glue on the model’s skin

– Unused lash fibers on the model’s face,

– Pencil markings on the eyelid are allowed in the «before» photo but should be cleaned after work is completed.

Length (1-5 points)

Maximum length should not exceed 2mm longer than the natural lashes of the model. It may be shorter than the natural lashes

Thickness (1-4 points)

The appropriate thickness is used. For classic eyelash extensions, the maximum thickness is 0.1mm or less. Multiple thicknesses may be used

Color (1-5 points)

Black and all shades of brown may be used. The chosen color should suit the model’s color type. Combining allowed colors is encouraged.

Symmetry of Direction (1-10 points)

Evaluated separately:

– Symmetry of lashes on each eye (lashes should be parallel to each other) – 1-5 points;

– Symmetry of the direction relative to both eyes – 1-5 points.

Smooth Transition of Lengths (1-10 points)

Left eye – 1-5 points

Right eye – 1-5 points. Total maximum 10 points

Distance from the eyelid (1-10 points)

Evaluated separately:

– Evenness of the distance – 1-5 points;

– Distance from the eyelid within the allowable range – 1-5 points. Total maximum 10 points.

The distance between the eyelid and the lash should be same and between 0.3 – 0.8 mm.

 Two variations of the distance are allowed:

– Same across the entire eye (e.g., 0.5 mm)

– Slightly smaller but same in the inner and outer corners (e.g., 0.3 mm), and slightly larger but same in the central part of the eye (e.g., 0.5 mm)

Inner Corner Filling (1-5 points)

The first 5 lashes starting from the tear duct. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Outer Corner Filling (1-5 points)

The last 5 lashes. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Overall Filling (1-10 points)

100% of lashes should be filled. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Eye Redness (0 – -5 points)

If the redness of the blood vessels in the eyes is the same in both the «before» and «after» photos, no points are deducted.

Overall Impression (1-10 points)

Evaluated based on the overall impression after the work is completed. The extensions should harmoniously fit the model’s overall image and color type. The model should have a neat appearance, clean and combed hair. Groomed eyebrows are appreciated. Groomed eyebrows are appreciated. Light makeup is allowed for the model. Only a small amount of foundation and/or powder may be used on the upper eyelid. Note that if cosmetic products are visible in the lash line, points may be deducted for cleanliness. Skin imperfections do not affect the score, but it’s preferable to choose a model with clean facial skin.

Bonus Points:

Using more than 1 color – 2 points

Black and all shades of brown may be used. The selected colors must suit the model’s color type.

Using more than 1 curl – 2-3 points

1 curl – 0 points

2 curls – 2 points

3 or more curls – 3 points

Fullness of Natural Lashes (1-3 points)

Evaluated based on the «before» photo.

The model has few natural lashes – 1 point

Medium fullness of lashes – 2 points

Very full lashes – 3 points

Eye Asymmetry (1-3 points)

Evaluated based on the «before» photo.

No asymmetry – 1 point

Slight asymmetry – 2 points

Strong asymmetry – 3 points

Modelling (1-10 points)

When evaluating, attention is paid to how well the effect and lash curl were selected for the model. If asymmetry was present, the degree to which it was corrected is also considered. The more complex the asymmetry in the «before» photo, and the better it.

Work Cleanliness (1-10 points)

Evaluated based on both «before» and «after» photos..

– White residue from remover on the lashes,

– Residues of eye shadow, mascara, or other cosmetics,

– Foundation in between the lashes,

– Debris in the inner and outer corners of the eyes,

– Tear residue in the outer corners of the eyes,

– Excess glue used,

– Glue on the model’s skin

– Unused lash fibers on the model’s face,

– Pencil markings on the eyelid are allowed in the «before» photo but should be cleaned after work is completed.

Length (1-5 points)

Maximum length should not exceed 2mm longer than the natural lashes of the model. It may be shorter than the natural lashes

Thickness (1-4 points)

The allowed thickness has been used. For 3D lash extensions, 0.07 mm or less is acceptable. Multiple thicknesses may be used.

Color (1-5 points)

Black and all shades of brown may be used. The chosen color should suit the model’s color type. Combining allowed colors is encouraged.

Symmetry of Direction (1-10 points)

Evaluated separately:

– Symmetry of lashes on each eye (lashes should be parallel to each other) – 1-5 points;

– Symmetry of the direction relative to both eyes – 1-5 points.

Smooth Transition of Lengths (1-10 points)

Left eye – 1-5 points

Right eye – 1-5 points. Total maximum 10 points

Distance from the eyelid (1-10 points)

Evaluated separately:

– Evenness of the distance – 1-5 points;

– Distance from the eyelid within the allowable range – 1-5 points. Total maximum 10 points.

The distance between the eyelid and the lash should be same and between 0.3 – 0.8 mm.

Two variations of the distance are allowed:

– Same across the entire eye (e.g., 0.5 mm)

– Slightly smaller but same in the inner and outer corners (e.g., 0.3 mm), and slightly larger but same in the central part of the eye (e.g., 0.5 mm)

Inner Corner Filling (1-5 points)

The first 5 lashes starting from the tear duct. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Outer Corner Filling (1-5 points)

The last 5 lashes. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Overall Filling (1-10 points)

100% of lashes should be filled. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Fan Geometry (1-5 points)

The distance between the lashes in the fan should be same. The degree of spread is at the participant's discretion, but a narrower spread is preferred.

Symmetry of Fans (1-5 points)

All fans should be symmetrical to each other.

Eye Redness (0 – -5 points)

If the redness of the blood vessels in the eyes is the same in both the «before» and «after» photos, no points are deducted.

Overall Impression (1-10 points)

Evaluated based on the overall impression after the work is completed. The extensions should harmoniously fit the model’s overall image and color type. The model should have a neat appearance, clean and combed hair. Groomed eyebrows are appreciated. Groomed eyebrows are appreciated. Light makeup is allowed for the model. Only a small amount of foundation and/or powder may be used on the upper eyelid. Note that if cosmetic products are visible in the lash line, points may be deducted for cleanliness. Skin imperfections do not affect the score, but it’s preferable to choose a model with clean facial skin.

Bonus Points:

Using more than 1 color – 2 points

Black and all shades of brown may be used. The selected colors must suit the model’s color type.

Using more than 1 curl – 2-3 points

1 curl – 0 points

2 curls – 2 points

3 or more curls – 3 points

Fullness of Natural Lashes (1-3 points)

Evaluated based on the «before» photo.

The model has few natural lashes – 1 point

Medium fullness of lashes – 2 points

Very full lashes – 3 points

Eye Asymmetry (1-3 points)

Evaluated based on the «before» photo.

No asymmetry – 1 point

Slight asymmetry – 2 points

Strong asymmetry – 3 points

Modelling (1-10 points)

When evaluating, attention is paid to how well the effect and lash curl were selected for the model. If asymmetry was present, the degree to which it was corrected is also considered. The more complex the asymmetry in the «before» photo, and the better it.

Work Cleanliness (1-10 points)

Evaluated based on both «before» and «after» photos.

– White residue from remover on the lashes,

– Residues of eye shadow, mascara, or other cosmetics,

– Foundation in between the lashes,

– Particles in the inner and outer corners of the eyes,

– Tear residue in the outer corners of the eyes,

– Excess glue used,

– Glue on the model’s skin

– Unused lash fibers on the model’s face,

– Pencil markings on the eyelid are allowed in the «before» photo but should be cleaned after work is completed.

Length (1-5 points)

Maximum length should not exceed 2mm longer than the natural lashes of the model. It may be shorter than the natural lashes

Thickness (1-4 points)

The allowed thickness has been used. For 5D lash extensions, 0.07 mm or less is acceptable. Multiple thicknesses may be used.

Color (1-5 points)

Black and all shades of brown may be used. The chosen color should suit the model’s color type. Combining allowed colors is encouraged.

Symmetry of Direction (1-10 points)

Evaluated separately:

– Symmetry of lashes on each eye (lashes should be parallel to each other) – 1-5 points;

– Symmetry of the direction relative to both eyes – 1-5 points.

Smooth Transition of Lengths (1-10 points)

Left eye – 1-5 points

Right eye – 1-5 points. Total maximum 10 points

Distance from the eyelid (1-10 points)

Evaluated separately:

– Evenness of the distance – 1-5 points;

– Distance from the eyelid within the allowable range – 1-5 points. Total maximum 10 points.

The distance between the eyelid and the lash should be same and between 0.3 – 0.8 mm.

Two variations of the distance are allowed:

– Same across the entire eye (e.g., 0.5 mm)

– Slightly smaller but same in the inner and outer corners (e.g., 0.3 mm), and slightly larger but same in the central part of the eye (e.g., 0.5 mm)

Inner Corner Filling (1-5 points)

The first 5 lashes starting from the tear duct. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Outer Corner Filling (1-5 points)

The last 5 lashes. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Overall Filling (1-10 points)

100% of lashes should be filled. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Fan Geometry (1-5 points)

The distance between the lashes in the fan should be even. The degree of spread is at the participant’s discretion, but a narrower spread is preferred.

Symmetry of Fans (1-5 points)

All fans should be symmetrical to each other.

Eye Redness (0 – -5 points)

If the redness of the blood vessels in the eyes is the same in both the «before» and «after» photos, no points are deducted.

Overall Impression (1-10 points)

Evaluated based on the overall impression after the work is completed. The extensions should harmoniously fit the model’s overall image and color type. The model should have a neat appearance, clean and combed hair. Groomed eyebrows are appreciated. Groomed eyebrows are appreciated. Light makeup is allowed for the model. Only a small amount of foundation and/or powder may be used on the upper eyelid. Note that if cosmetic products are visible in the lash line, points may be deducted for cleanliness. Skin imperfections do not affect the score, but it’s preferable to choose a model with clean facial skin.

Bonus Points:

Using more than 1 color – 2 points

Black and all shades of brown may be used. The selected colors must suit the model’s color type.

Using more than 1 curl – 2-3 points

1 curl – 0 points

2 curls – 2 points

3 or more curls – 3 points

Fullness of Natural Lashes (1-3 points)

Evaluated based on the «before» photo.

The model has few natural lashes – 1 point

Medium fullness of lashes – 2 points

Very full lashes – 3 points

Eye Asymmetry (1-3 points)

Evaluated based on the «before» photo.

No asymmetry – 1 point

Slight asymmetry – 2 points

Strong asymmetry – 3 points

Modelling (1-10 points)

When evaluating, attention is paid to how well the effect and lash curl were selected for the model. If asymmetry was present, the degree to which it was corrected is also considered. The more complex the asymmetry in the «before» photo, and the better it.

Work Cleanliness (1-10 points)

Evaluated based on both «before» and «after» photos.

– White residue from remover on the lashes,

– Residues of eye shadow, mascara, or other cosmetics,

– Foundation in between the lashes,

– Particles in the inner and outer corners of the eyes,

– Tear residue in the outer corners of the eyes,

– Excess glue used,

– Glue on the model’s skin

– Unused lash fibers on the model’s face,

– Pencil markings on the eyelid are allowed in the «before» photo but should be cleaned after work is completed.

Length (1-5 points)

Maximum length should not exceed 2mm longer than the natural lashes of the model. It may be shorter than the natural lashes. If spikes are used in the work, they may be longer.

Thickness (1-4 points)

The allowed thickness has been used. For 3D-5D volumes, 0.07 mm or less is acceptable, and for 6D and higher volumes, 0.05 mm or less is required. Multiple thicknesses may be used.

Coloring (1-10 points)

Black and all shades of brown are not allowed.
At least 2 different colors must be used in the work. Ombre counting as 1 color. The selected colors should complement each other and harmoniously fit the model’s overall look

Symmetry of Direction (1-10 points)

Evaluated separately:

– Symmetry of lashes on each eye separately (lashes should be parallel to each other, and if there are spikes, they should also be parallel to each other) – 1-5 points;

– Symmetry of the direction relative to both eyes – 1-5 points.

Distance from the eyelid (1-10 points)

Evaluated separately:

– Evenness of the distance – 1-5 points;

– Distance from the eyelid within the allowable range – 1-5 points. Total maximum 10 points.

The distance between the eyelid and the lash should be same and between 0.3 – 0.8 mm.

Two variations of the distance are allowed:

– Same across the entire eye (e.g., 0.5 mm)

– Slightly smaller but same in the inner and outer corners (e.g., 0.3 mm), and slightly larger but same in the central part of the eye (e.g., 0.5 mm)

Inner Corner Filling (1-5 points)

The first 5 lashes starting from the tear duct. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Outer Corner Filling (1-5 points)

The last 5 lashes. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Overall Filling (1-10 points)

100% of lashes should be filled. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Fan Geometry (1-5 points)

The distance between the lashes in the fan should be even. The degree of spread is at the participant’s discretion, but a narrower spread is preferred. If there are spikes in the work, they are not considered in the evaluation

Symmetry of Fans (1-5 points)

All fans should be symmetrical to each other. If there are spikes in the work, they are not considered in the evaluation.

Eye Redness (0 – -5 points)

If the redness of the blood vessels in the eyes is the same in both the «before» and «after» photos, no points are deducted.

Overall Impression (1-10 points)

Evaluated based on the overall impression after the work is completed. The extensions should harmoniously fit the model’s overall image and color type. The model should have a neat appearance, clean and combed hair. Groomed eyebrows are appreciated. Groomed eyebrows are appreciated. Light makeup is allowed for the model. Only a small amount of foundation and/or powder may be used on the upper eyelid. Note that if cosmetic products are visible in the lash line, points may be deducted for cleanliness. Skin imperfections do not affect the score, but it’s preferable to choose a model with clean facial skin.

Bonus Points:

Using more than 1 curl – 2-3 points

1 curl – 0 points

2 curls – 2 points

3 or more curls – 3 points

Fullness of Natural Lashes (1-3 points)

Evaluated based on the «before» photo.

The model has few natural lashes – 1 point

Medium fullness of lashes – 2 points

Very full lashes – 3 points

Eye Asymmetry (1-3 points)

Evaluated based on the «before» photo.

No asymmetry – 1 point

Slight asymmetry – 2 points

Strong asymmetry – 3 points

Modelling (1-10 points)

When evaluating, attention is paid to how well the effect and lash curl were selected for the model. If asymmetry was present, the degree to which it was corrected is also considered. The more complex the asymmetry in the «before» photo, and the better it.

Work Cleanliness (1-10 points)

Evaluated based on both «before» and «after» photos..

– White residue from remover on the lashes,

– Residues of eye shadow, mascara, or other cosmetics,

– Foundation in between the lashes,

– Particles in the inner and outer corners of the eyes,

– Tear residue in the outer corners of the eyes,

– Excess glue used,

– Glue on the model’s skin

– Unused lash fibers on the model’s face,

– Pencil markings on the eyelid are allowed in the «before» photo but should be cleaned after work is completed.

Length (1-5 points)

Maximum length should not exceed 2mm longer than the natural lashes of the model. It may be shorter than the natural lashes. If spikes are used in the work, they may be longer.

Thickness (1-4 points)

The allowed thickness has been used. For 3D-5D volumes, 0.07 mm or less is acceptable, and for 6D and higher volumes, 0.05 mm or less is required. Multiple thicknesses may be used.

Color (1-5 points)

Black and all shades of brown may be used. The chosen color should suit the model’s color type. Combining allowed colors is encouraged.

Symmetry of Direction (1-10 points)

Evaluated separately:

– Symmetry of lashes on each eye separately (lashes should be parallel to each other, and if there are spikes, they should also be parallel to each other) – 1-5 points;

– Symmetry of the direction relative to both eyes – 1-5 points.

Distance from the eyelid (1-10 points)

Evaluated separately:

– Evenness of the distance – 1-5 points;

– Distance from the eyelid within the allowable range – 1-5 points. Total maximum 10 points.

The distance between the eyelid and the lash should be same and between 0.3 – 0.8 mm.

Two variations of the distance are allowed:

– Same across the entire eye (e.g., 0.5 mm)

– Slightly smaller but same in the inner and outer corners (e.g., 0.3 mm), and slightly larger but same in the central part of the eye (e.g., 0.5 mm)

Inner Corner Filling (1-5 points)

The first 5 lashes starting from the tear duct. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Outer Corner Filling (1-5 points)

The last 5 lashes. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Overall Filling (1-10 points)

100% of lashes should be filled. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Eye Redness (0 – -5 points)

If the redness of the blood vessels in the eyes is the same in both the «before» and «after» photos, no points are deducted.

Overall Impression (1-10 points)

Evaluated based on the overall impression after the work is completed. The extensions should harmoniously fit the model’s overall image and color type. The model should have a neat appearance, clean and combed hair. Groomed eyebrows are appreciated. Groomed eyebrows are appreciated. Light makeup is allowed for the model. Only a small amount of foundation and/or powder may be used on the upper eyelid. Note that if cosmetic products are visible in the lash line, points may be deducted for cleanliness. Skin imperfections do not affect the score, but it’s preferable to choose a model with clean facial skin.

Bonus Points:

Using more than 1 color – 2 points

Black and all shades of brown may be used. The selected colors must suit the model’s color type.

Using more than 1 curl – 2-3 points

1 curl – 0 points

2 curls – 2 points

3 or more curls – 3 points

Fullness of Natural Lashes (1-3 points)

Evaluated based on the «before» photo.

The model has few natural lashes – 1 point

Medium fullness of lashes – 2 points

Very full lashes – 3 points

Eye Asymmetry (1-3 points)

Evaluated based on the «before» photo.

No asymmetry – 1 point

Slight asymmetry – 2 points

Strong asymmetry – 3 points

Modelling (1-10 points)

When evaluating, attention is paid to how well the effect and lash curl were selected for the model. If asymmetry was present, the degree to which it was corrected is also considered. The more complex the asymmetry in the «before» photo, and the better it.

Work Cleanliness (1-10 points)

Evaluated based on both «before» and «after» photos.

– White residue from remover on the lashes,

– Residues of eye shadow, mascara, or other cosmetics,

– Foundation in between the lashes,

– Particles in the inner and outer corners of the eyes,

– Tear residue in the outer corners of the eyes,

– Excess glue used,

– Glue on the model’s skin

– Unused lash fibers on the model’s face,

– Pencil markings on the eyelid are allowed in the «before» photo but should be cleaned after work is completed.

Length (1-5 points)

Maximum length should not exceed 2mm longer than the natural lashes of the model. It may be shorter than the natural lashes. If spikes are used in the work, they may be longer.

Thickness (1-4 points)

The allowed thickness has been used. For 3D-5D volumes, 0.07 mm or less is acceptable, and for 6D and higher volumes, 0.05 mm or less is required. Multiple thicknesses may be used.

Color (1-5 points)

Black and all shades of brown may be used. The chosen color should suit the model’s color type. Combining allowed colors is encouraged.

Symmetry of Direction (1-10 points)

Evaluated separately:

– Symmetry of lashes on each eye separately (lashes should be parallel to each other, and if there are spikes, they should also be parallel to each other) – 1-5 points;

– Symmetry of the direction relative to both eyes – 1-5 points.

Distance from the eyelid (1-10 points)

Evaluated separately:

– Evenness of the distance – 1-5 points;

– Distance from the eyelid within the allowable range – 1-5 points. Total maximum 10 points.

The distance between the eyelid and the lash should be same and between 0.3 – 0.8 mm.

Two variations of the distance are allowed:

– Same across the entire eye (e.g., 0.5 mm)

– Slightly smaller but same in the inner and outer corners (e.g., 0.3 mm), and slightly larger but same in the central part of the eye (e.g., 0.5 mm)

Inner Corner Filling (1-5 points)

The first 5 lashes starting from the tear duct. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Outer Corner Filling (1-5 points)

The last 5 lashes. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

At the outer corner of the eye, a gap of up to 5 mm can be left, meaning no lashes can be applied to the first 5 mm of the outer corner. In this case, the evaluation of the fill will start from the first applied lash.

Overall Filling (1-10 points)

100% of lashes should be filled. Anagen lashes up to 1 mm may not be extended, but it should be clearly visible in the photo that these are anagen lashes. If the photo shows the base of the lash but not the tip, the judge has the right to consider it as a normal lash without extension.

Eye Redness (0 – -5 points)

If the redness of the blood vessels in the eyes is the same in both the «before» and «after» photos, no points are deducted.

Overall Impression (1-10 points)

Evaluated based on the overall impression after the work is completed. The extensions should harmoniously fit the model’s overall image and color type. The model should have a neat appearance, clean and combed hair. Groomed eyebrows are appreciated. Groomed eyebrows are appreciated. Light makeup is allowed for the model. Only a small amount of foundation and/or powder may be used on the upper eyelid. Note that if cosmetic products are visible in the lash line, points may be deducted for cleanliness. Skin imperfections do not affect the score, but it’s preferable to choose a model with clean facial skin.

Bonus Points:

Using more than 1 color – 2 points

Black and all shades of brown may be used. The selected colors must suit the model’s color type.

Using more than 1 curl – 2-3 points

1 curl – 0 points

2 curls – 2 points

3 or more curls – 3 points